Made to fit.Built to last.
Kitchens, wardrobes, wooden doors, panelling, partitions and bespoke furniture — manufactured, installed and repaired for residential and commercial interiors across Dubai.
- Carcass
- Moisture-resistant board
- Fronts
- Veneer / lacquer / laminate
- Edges
- Machine-banded
- Setting out
- Measured on site
The millimetre
Judged atarm’s length.
A facade is read from across a street. Joinery is read from 300 millimetres away, by someone opening it every morning. A shadow gap that runs out by two millimetres is invisible on an elevation and obvious on a wardrobe door.
So nothing is cut to the drawing. Every opening is measured on site, after the plaster and the floor, because that is the room the joinery has to live in — walls are rarely as square as the plan says they are.
Humidity is the long game. Boards and adhesives are specified for a Gulf interior that swings between a sealed, chilled room and an open door in August, because a door that stops closing in year two was never a saving.
Scope
What we make
- 01
Kitchens & cabinetry
Kitchen runs, islands, kitchen cabinets and kitchen doors, with handleless and fluted fronts and carcasses specified for Gulf humidity rather than a temperate kitchen.
- 02
Wardrobes, closets & shelving
Hinged, sliding and walk-in wardrobes, fitted storage and open shelving, built to the room rather than to a catalogue size, with internals set out around what is actually going in them.
- 03
Media walls & wall panelling
TV units and media walls, slatted and flat wall panelling and wooden partitions, set out so the joints land where the eye expects them and the lighting sits inside the joinery.
- 04
Wooden & custom doors
Wooden door sets and frames, flush, panelled and veneered custom doors, hung to swing true and close the same way in year five as on handover day.
- 05
Furniture, counters & vanities
Custom furniture and office furniture, reception counters and vanity units — the bespoke pieces that are touched every day and show every shortcut.
- 06
Repair & maintenance
Furniture repair, door repair and cabinet repair, with scheduled joinery maintenance — re-aligning, re-facing and re-finishing existing work rather than only building new.
Materials & finishes
The surface isthe whole job.
Veneer, lacquer and laminate each fail differently, and each belongs somewhere. The choice is made per room — what it will be touched with, how much light it takes, and whether it can ever be repaired in place.
New to specifying joinery? Our guides explain what drives the cost of custom carpentry in Dubai and what to know before ordering custom wardrobes.
Veneer
Real timber, sequence-matched across a run so the grain carries through a whole elevation rather than restarting at every door.
Lacquer
Sprayed and flatted for a seamless front. It shows a poor substrate more than any other finish, which is exactly why the carcass matters.
Laminate
The honest choice where a surface takes daily abuse — a utility run, an office counter, a child’s wardrobe.
Fluting & slats
Machined to a consistent pitch and returned around corners, so the rhythm does not break where two panels meet.
Selected work
Fitted, not fitted in.
Made in theworkshop. Fitted once.
Doors are hung, drawers are run and fronts are aligned on the bench before anything goes near a lorry. A correction there costs an hour; the same correction on site costs a day and a apology to whoever else is working in the room.
Then it is set on site by our own fitters — scribed to the wall it actually meets, with the gaps even and the doors closing the same way in ten years as they do on handover day.
Why choose us
Judged by whatyou keep.
As a joinery company in Dubai, Zeenat Al Sahraa covers the full range of joinery a home or office is measured by — kitchens and kitchen cabinets, wardrobes, walk-in closets and shelving, media walls and TV units, wall panelling and wooden partitions, wooden and custom doors, reception counters, vanity units and bespoke furniture. Every piece is custom-manufactured in our own joinery workshop and fitted by our own crews, and because we make and install the work ourselves, the reveals you sign off on handover day are the ones still holding a line years later.
It is one package from one contractor — coordinated with our aluminium works and glass works. See finished rooms in our Dubai projects, or request a free quote.
Made and fitted in-house
One team from survey to snag list — no gap between a fabricator and an installer for a fault to hide in.
The full range, one workshop
Kitchens, wardrobes, doors, panelling, partitions, shelving and furniture from one joiner, so a room does not need three suppliers to finish.
Specified for a Gulf interior
Moisture-resistant carcasses and acclimatised timber, so a door or drawer that closes in November still closes in August.
Repair as well as new work
We repair and re-finish existing furniture, doors and cabinets and maintain joinery over time — not only build from scratch.
Service areas in Dubai
As a joinery company in Dubai, Zeenat Al Sahraa delivers carpentry and joinery across Dubai — Emirates Hills, Dubai Hills, Palm Jumeirah, Al Barari, Jumeirah, Downtown, Business Bay and DIFC — and the wider UAE.
Industries we serve
Villas and private homes, apartments, offices, retail units, showrooms, and hospitality and F&B interiors.
Care & maintenance
As a joinery company in Dubai, we maintain and repair as well as build. Furniture repair, door repair and cabinet repair in Dubai — a sticking wardrobe door, a dropped hinge, a chipped veneer, a shelving runner that has worn — are a scheduled visit, not a rebuild, and regular joinery and carpentry maintenance keeps a fit-out looking new for years. Between visits, timber lasts when it is kept out of standing water and swung rather than slammed: wipe veneer and lacquer with a soft, barely-damp cloth, keep hinges and runners clear of grit, and let a chilled room and an open August door settle rather than forcing a door that has tightened.
Frequently asked questions
Good to know.
The questions that come up before a carpentry project in Dubai. If yours is not here, the team will answer it directly.
As a joinery company in Dubai, we offer the full range of carpentry and joinery services — kitchens and kitchen cabinets, wardrobes, closets and shelving, media walls and TV units, wall panelling and wooden partitions, wooden and custom doors, reception counters, vanity units and bespoke furniture — all custom-manufactured and installed. We also repair and maintain existing joinery.
Yes — kitchen cabinet installation across Dubai, covering runs, islands, kitchen cabinets and kitchen doors, with handleless and fluted fronts and carcasses specified for Gulf humidity rather than a temperate kitchen.
Yes — wooden doors and door installation in Dubai. Flush, panelled and veneered custom doors with their frames, made to the opening and hung to swing true. Wooden partitions and wall panelling are part of the same joinery package.
Yes. Furniture repair, door repair and cabinet repair in Dubai, with scheduled joinery maintenance — re-aligning, re-hanging, re-facing and re-finishing existing work. A sticking door or a worn runner is usually a short visit rather than a replacement.
Yes — custom furniture and office furniture in Dubai, including reception counters, vanity units and fitted storage, built to the drawing and the daily wear the piece will actually see.
Yes — media walls, TV units, wall panelling and shelving installation across Dubai, set out so the pitch holds across a run and the lighting sits inside the joinery.
Send the drawing.We will price it.
Start an enquiryStart a project
Planning a carpentry, aluminium or glass project?
Speak with our team about your requirements, drawings, site conditions and project timeline.